31. The multiplier and the meter coil in a voltmeter are in
(a) series
(b) parallel
(c) series-parallel
(d) none of the above
Ans: a
32. A moving iron instrument can be used for
(a) D.C. only
(b) A.C. only
(c) both D.C. and A.C.
Ans: c
33. The scale of a rectifier instrument is
(a) linear
(b) non-linear
(c) either (a) or (b)
(d) neither (a) nor (b)
Ans: a
34. For measuring current at high frequency we should use
(a) moving iron instrument
(b) electrostatic instrument
(c) thermocouple instrument
(d) none of the above
Ans: c
35. The resistance in the circuit of the moving coil of a dynamometer wattmeter should be
(a) almost zero
(b) low
(c) high
(d) none of the above
Ans: c
36. A dynamometer wattmeter can be used for
(a) both D.C. and A.C.
(b) D.C. only
(c) A.C. only
(d) any of the above
Ans: a
37. An induction wattmeter can be used for
(a) both D.C. and A.C.
(6) D.C. only
(c) A.C. only
(d) any of the above
Ans: b
38. The pressure coil of a wattmeter should be connected on the supply side of the current coil when
(a) load impedance is high
(b) load impedance is low
(c) supply voltage is low
(d) none of the above
Ans: a
39. In a low power factor wattmeter the pressure coil is connected
(a) to the supply side of the current coil
(b) to the load side of the current coil
(c) in any of the two meters at connection
(d) none of the above
Ans: b
40. In a low power factor wattmeter the compensating coil is connected
(a) in series with current coil
(b) in parallel with current coil
(c) in series with pressure coil
(d) in parallel with pressure coil
Ans: c
Read More Questions:
Measurement and Instrumentation MCQs Part1
Measurement and Instrumentation MCQs Part2
(a) series
(b) parallel
(c) series-parallel
(d) none of the above
Ans: a
32. A moving iron instrument can be used for
(a) D.C. only
(b) A.C. only
(c) both D.C. and A.C.
Ans: c
33. The scale of a rectifier instrument is
(a) linear
(b) non-linear
(c) either (a) or (b)
(d) neither (a) nor (b)
Ans: a
34. For measuring current at high frequency we should use
(a) moving iron instrument
(b) electrostatic instrument
(c) thermocouple instrument
(d) none of the above
Ans: c
35. The resistance in the circuit of the moving coil of a dynamometer wattmeter should be
(a) almost zero
(b) low
(c) high
(d) none of the above
Ans: c
36. A dynamometer wattmeter can be used for
(a) both D.C. and A.C.
(b) D.C. only
(c) A.C. only
(d) any of the above
Ans: a
37. An induction wattmeter can be used for
(a) both D.C. and A.C.
(6) D.C. only
(c) A.C. only
(d) any of the above
Ans: b
38. The pressure coil of a wattmeter should be connected on the supply side of the current coil when
(a) load impedance is high
(b) load impedance is low
(c) supply voltage is low
(d) none of the above
Ans: a
39. In a low power factor wattmeter the pressure coil is connected
(a) to the supply side of the current coil
(b) to the load side of the current coil
(c) in any of the two meters at connection
(d) none of the above
Ans: b
40. In a low power factor wattmeter the compensating coil is connected
(a) in series with current coil
(b) in parallel with current coil
(c) in series with pressure coil
(d) in parallel with pressure coil
Ans: c
Read More Questions:
Measurement and Instrumentation MCQs Part1
Measurement and Instrumentation MCQs Part2
No comments:
Post a Comment